The Manufacture, Supply, and Commissioning of a Ne...

FREE TRIAL

Get Access to 1 Million Global Tenders

You are Successfully Registered to zimbabwetenders!!

Email Id is already exist !!

Something went wrong !!

Publish Tenders

Click here to publish tender and gain more visibility worldwide.

Subscription Plans

Click here to upgrade to a Premium Plan.

100% Secure Payments

Tender Details

Download Tender Documents

Country: United Kingdom
Summary: The Manufacture, Supply, and Commissioning of a Neutron Source at Culham Campus for the Librti Programme
GBT Ref No: 103686671
Deadline: 12 Aug 2024
Competition: ICB
Financier: Self Financed
Purchaser Ownership: Public
Tender Value: 25000000
Notice Type: Tender
Document Ref. No.: 20240703170737-72814
Purchaser's Detail :

Purchaser : UNITED KINGDOM ATOMIC ENERGY AUTHORITY
Culham Campus Abingdon OX14 3DB ENG
Contact Person : Carl Evans
Email :Carl.evans@ukaea.uk

Description :
The manufacture, supply, and commissioning of a neutron source and supply of ancillary systems including, but not limited to cooling systems, power supplies, tritium handling (if required) and other control systems with the best available output (source strength and operational availability) that is capable of allowing tritium breeding mock-ups to be exposed to 14.1 MeV neutrons. The Neutron Source shall have proven operational availability (creating 14MeV neutrons) of at least 500 hours per annum to facilitate the LIBRTI experimental programme. The Equipment supplied to the Client shall be based upon existing products capable of being delivered within 24 months from point of contract award.

In parallel with the development of a baseline system stated above the Contractor shall commit to support the Client in a collaborative endeavour to develop an upgrade solution of the baseline system to increase its output and thereby target exposure fluxes of 1013 n/cm2/s. The contractor may wish to take on the full development programme but as a minimum, shall ensure that the baseline system can be updated with a retrofit and that the Contractor will supply drawings and technical information adequate to supporting an upgrade. The development of the upgrade shall be centred around the assumption of it being deployable as an on-site modification of the existing Client baseline installation. The R&D programme described above shall be completed within 36 months from contract award...
Documents :